BURL B32 VANCOUVER 사용자 설명서 - 페이지 3

{카테고리_이름} BURL B32 VANCOUVER에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. BURL B32 VANCOUVER 7 페이지. Mix bus

B32 VANCOUVER QUICK START

UNPACK AND CONFIRM VOLTAGE:

Remove the B32 from the box.

Before racking and plugging in the B32, confirm the voltage setting of the B32 is correct for your region. From above the

unit, look through the lid to see if it's set to 115V or 230V. If voltage is set correctly, skip to page 4.

Powering the unit up at 220V while the unit is set to 115V will result in a blown fuse and the unit will not power up.

TO SWITCH VOLTAGE:

1. Remove all screws from lid.

2. Locate voltage switch.

3. Adjust voltage switch to 115V or 230V.

4. Replace lid and screws.