BURL BAD8 빠른 시작 매뉴얼

{카테고리_이름} BURL BAD8에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BURL BAD8 2 페이지. Daughter card

BAD8 Daughter Card Quick Start Guide

Revision 1.0 April 04, 2017

The BAD8 requires BMBx ROM2 or later.

Important Information regarding BAD8 and BAD4 Latency:

If you plan on using BAD8s in combination with BAD4s, you must adjust the BAD8 delay to match the

BAD4 delay when using simultaneously in order to maintain phase consistency. If you are using the

BAD8 independently, (i.e. BAD8 for tracking and BAD4 for mixing) this is not a concern.

The BAD4 has a fixed delay (latency) from analog input to BMB output of 66 samples, whereas the

BAD8 delay is configurable from 7 samples to 66 samples. Adjusting the delay will change the filter

setting and it will change the sound. The factory default setting is 7 samples of delay. Not only is this

the lowest latency, but we believe this filter sounds the best.