Burl Audio B2 Bomber ADC 사용자 설명서 - 페이지 6
{카테고리_이름} Burl Audio B2 Bomber ADC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Burl Audio B2 Bomber ADC 17 페이지. With dante
페이지 인쇄Getting Started:
1.
Connect XLR cables to analog input.
2.
Connect desired digital output (Dante, AES, SPDIF or Optical).
3.
Connect Word Clock cables if clocking via Word Clock (clocking via Dante, SPDIF or AES is also possible).
4.
Set clock to Int. or Ext. (Internal recommended whenever possible).
5.
Set sample rate on front panel, when clock master.
Select Dual Wire On or Off.
6.
Set input level. We recommend starting at -18 dbfs.
7.
B2 Bomber ADC Signal Path
INPUT
PIN 2
PIN 3
PIN 1
Getting Started:
1.
Connect XLR cables to (analog) output.
2.
Connect desired digital Input Source (Dante, AES, SPDIF or Optical).
3.
Connect Word Clock cables if clocking via Word Clock
(clocking via Dante, SPDIF or AES is also possible).
Select Input Source.
Set clock to Int., Ext. or Digital In (Internal clock recommended whenever possible).
4.
5.
Set sample rate on front panel, when clock master.
6.
Set Output Level.
B2 Bomber DAC Signal Path
Figure 2
B2 BOMBER ADC
BX1 Input
Transformer
Input Level
B2 BOMBER DAC
Attenuator
DAC
ADC
BOPA1
OUTPUT
+ PIN 2
- PIN 3
PIN 1
BOPA1
6
Figure 1