Burl Audio B2 Bomber DAC 사용자 설명서 - 페이지 4

{카테고리_이름} Burl Audio B2 Bomber DAC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Burl Audio B2 Bomber DAC 17 페이지. With dante

B2 ADC FRONT PANEL CONTROLLS:

Figure 3

1. Input Level Attenuator- ***POST TRANSFORMER*** Allows quick selection between analog +4dBu =

-12, -14, -16, -18, -20, -22 dBfs digital headroom.

2. Dual Wire- Sends LEFT to AES1, RIGHT to AES2 at 176.4kHz and 192kHz only. With Dual Wire off, L and R

are sent over both AES1 and AES2. Make sure Dual Wire is off for all sample rates other than 192/176.4 kHz.

3. High Resolution Meter- 30 segment meter shows RMS level and Peak simultaneously.

4. Lock- Red "LOCK" indicates unit is clocking correctly. When not lit, unit is not locked to external clock.

Lock is always lit when on internal clock. When lock is lost, unit automatically switches to Internal.

5. Peak Reset- Clears the peak light.

6. Clock Source- Select Internal Clock, External clock (Word Clock), or DANTE.

7. Sample Rate Select- (For internal clock) Manually select sample rate to 44.1, 48, 88.2, 96, 176.4, 192 kHz.

B2 DAC FRONT PANEL CONTROLLS:

Figure 4

1. Output Level Attenuator - Allows quick selection between analog +4dBu =

-18, -16, -14, -12, -10, and -8 dBfs digital headroom.

2. Input Source - Selects input between AES1, AES2, Dante (optional), SPDIF, or TOS.

3. High Resolution Meter - 30 segment meter shows RMS level and Peak simultaneously.

4. Lock - Red "LOCK" indicates unit is clocking correctly. When not lit, unit is not locked to external clock.

Lock is always lit when on internal clock. When lock is lost, unit automatically switches to Internal.

5. Peak Reset - Clears the peak light.

6. Clock Source - Select Internal Clock, External clock (Word Clock), or DANTE.

7. Sample Rate Select - (For iternal clock) Manually select sample rate to 44.1, 48, 88.2, 96, 176.4, 192 kHz.