Aquaport AQP-BM4 설치 및 운영 지침 매뉴얼 - 페이지 9

{카테고리_이름} Aquaport AQP-BM4에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquaport AQP-BM4 12 페이지. Deluxe collection water cooler cold and room

F. Trouble Shooting

BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST.

Problem

Possible Causes

1. Unit is not plugged into the wall socket.

2. Power/cooling switch at rear of unit is

No Power

turned off.

3. Fuse has blown.

1. Unit is not plugged into the wall socket.

2. Power/Cooling switch at rear of unit is

Not Cooling

turned off.

3. Unit may have been laid down during

transport.

Water is

leaking. *99%

of leaks that

1. Pin hole in spring water bottle.

may occur with

2. Faulty ﬂ oat valve on ﬁ lter bottle.

this unit are

3. Tap is not installed correctly.

caused by the

4. Loose hose connection.

bottle used

with the water

cooler*

What To Do

1. Check connection to wall socket.

2. Turn unit on from rear power/cooling switch.

3. Replace with new fuse.

1. Check connection to wall socket.

2. Turn unit on from rear power/cooling switch.

3. If the unit has been laid down during transport, keep the unit

up right for 48 hours before turning on. If still not cooling call

customer service on 1300 764 325.

1. Pin hole leaks are common when using polycarbonate spring water

bottles. It is highly recommended that the spring water bottle is

replaced and the fault reported to the spring water supplier.

2. Float valve on ﬁ lter bottle is not shutting off, contact ﬁ lter bottle

supplier for replacement ﬂ oat valve.

3. Ensure the tap is screwed onto the water cooler tightly.

4. Call customer service on 1300 764 325.

INSTALLATION AND OPERATING INSTRUCTIONS 7