Aquaport AQP-FKM2 설치 및 운영 지침 매뉴얼 - 페이지 11

{카테고리_이름} Aquaport AQP-FKM2에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquaport AQP-FKM2 17 페이지.

to insert Pressure Limiting Dual Check Valve (4). Make sure

there are no imperfections and that the end of the tubing is

cut perfectly square.

6. Push tubing into the Pressure Limiting Dual Check Valve (4),

ensuring that the water flow is in the direction of arrow.

NOTICE: TAP FAUCET NOT SUPPLIED WITH FILTER KIT

7. Connect 1/4" tubing (3) from filter head outlet (2d) to your

selected or existing tap faucet. Please refer to your faucet

installation manual for connection instructions.

Note: Movement of the tubing can cause strain on the

connections and may over time lead to a leak. We recommend

that you secure the tubing to the cabinet wall once installation is

complete.

E. System Start Up

1. Check to ensure that all filter cartridges are installed in the

correct positions, to ensure kit performs as stated.

2. Turn faucet to 'ON' position. Turn water supply 'ON' slowly at

isolation tap or water meter, to release any air trapped in the

system.

3. Leave faucet in the 'ON' position for approximately 2 minutes

to allow water to fully flow through the system.

4. Turn faucet 'OFF', and check for any water leaks around the

system.

Note: If leaks are present, connections may need to be re-

installed.

5. Turn faucet 'ON' and leave in the 'ON' position for

approximately 5 minutes to allow water to flush out the

system.

Note: Tiny air bubbles being expelled from the cartridge will

cause the water supply to appear "cloudy", this is normal.

This condition will clear itself over use, or you may flush water

through the system until water appears clear.

6. Your Aquaport water filtration system is now ready to produce

refreshing, great tasting water for you and your family.

INSTALLATION AND OPERATING INSTRUCTIONS 9