Chromcraft Revington SH2BXCT 조립 지침

{카테고리_이름} Chromcraft Revington SH2BXCT에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Chromcraft Revington SH2BXCT 3 페이지. Solid boatshape butterfly ext, dinning table

HARDWARE LIST :
(Large)
Hex Nut
Lock Washer
12 pcs
12 pcs
(A) For Gather
(B) For Dining
Height Table only
Height Table only
(long)
(short)
Thread Head
Thread Head
Bolt
Bolt
4 pcs
4 pcs
ASSEMBLY :
STEP 1
Turn the pedestal upside down. Attach legs by inserting hanger
bolts through pre-drilled holes on pedestal, insert Flat Washer,
Lock Washer and Nut onto the Hanger Bolt then tighten
with the Wrench provided.
STEP 2
To build a Gather Height Table use Hardware (A) Thread Head Bolt (long).
2.1 Turn the base right side up. Insert the Thread Head Bolt (long)
onto the column as shown in the below Figure 2.1.
To build a Dining Height Table use Hardware (B) Thread Head Bolt (short).
2.2 Turn the base right side up. Insert the Thread Head
Bolt (short) as shown in the below Figure 2.2.
STEP 3
Position the table top upside down on a smooth, protective
surface such as carpet.Unscrew the side panel with screw driver then
Install the side panel and secure with Flat Washer(Small), Lock
Washer(Small) and JCBC Bolt. Attach mounting plate as shown.
Secure with Flat Washer(Small), Lock Washer(Small) and JCBC Bolt,
then tighten all the bolts with Allen Key provided.
TBS-15468 PNM,GR
SH2T425712CT / SH2B425712CT/SH2BXCT
SOLID BOATSHAPE BUTTERFLY EXT, DINNING TABLE
(Large)
Wrench
Flat Washer
JCBC Bolt
1 pc
12 pcs
Unscrew the
side panel
(Small)
(Small)
Flat Washer
Lock Washer
8 pcs
8 pcs
8 pcs
Level Glide
Lock Washer (Large)
Flat Washer (Large)
Leg
Thread Head Bolt (long)
Lock Washer
(Small)
Allen Key
PAGE 1 OF 3
Allen Key
1 pc
(Fig 2.1)
Thread Head Bolt (short)
column
Counter height
table
Allen Key
Lock Washer(Small)
Wrench
Hex Nut
Pedestal
(Fig 2.2)
Dining table
JCBC Bolt
Flat Washer(Small)
Side Panel
MADE IN MALAYSIA