Burley Pre-2005 Encore 사용자 설명서 - 페이지 9

{카테고리_이름} Burley Pre-2005 Encore에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Burley Pre-2005 Encore 12 페이지. Handlebar & stroller wheel supplement

Bolt must go through hole in ﬂ exible coupling. Otherwise,

hitch could come loose causing an accident resulting in

injury or death.

VI. Using the Walk n' Roller Wheel

The wheel has two positions. One is for use as a trailer, "bike" position. The other is for

use as a stroller, "stroll" position. Before changing engage the parking brake.

To rotate the wheel, loosen the knob, #1.

This will loosen the triangular pivot clamp, #2, enough to rotate. Then rotate to either

the "bike" or "stroll" position as needed. Then tighten the knob.

Do not attempt to hitch the trailer to the bike with the wheel in "stroll" position.

VII. Installing the Brake

Note: If you have a 2004 Encore, this step is unnecessary.

Parts Needed for Brake Installation:

(1) brake assembly

Locate the gap in the trailer fabric that is behind the right wheel. The gap exposes a

1 inch diameter, aluminum main frame tube that runs along the inside of the wheel.

Undo the clamp in the brake assembly by removing the 1.5 inch long hex head bolt.

(1) ¼" x 1.5" hex head bolt (1) ¼" nut

Burley Walk 'n Roller Manual; models 2003 and earlier