CHROMOFLEX Pro Series 사용 설명서 - 페이지 10
{카테고리_이름} CHROMOFLEX Pro Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CHROMOFLEX Pro Series 10 페이지. 1/2 channel
CHROMOFLEX Pro Series에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지)
페이지 인쇄7.3 Pin resetting
For resetting the pin you have to open the device. After that you can reset the pin with the jumper shown in fig. 5
To do this please proceed as follows:
®
1. Disconnect
CHROMOFLEX
Pro
Bluetooth from power supply respectively turn device off
2. Open the housing
3. Put the jumper to position „Pin Reset" (pin 2+3)
4. Reconnect the power supply respectively turn device on
5. Wait until status LED go out (about 4s)
6. Disconnect power supply respectively turn it off
7. Set jumper back to „Normal" operation (pin 1+2)
8. Close the housing again
Fig. 5
8. Contents
®
Every
CHROMOFLEX
Pro
Bluetooth unit is shipped with this manual. The instructions are an integral part of
the equipment to which they relate and must be handed to the user.
®
Important note: Complete manuals for any
CHROMOFLEX
can be downloaded at www.barthelme.eu. Please
look for updates before installation.
9. Contact
Josef Barthelme GmbH & Co. KG
Oedenberger Str. 149
D-90491 Nürnberg, Germany
Tel: +49 (0) 911 42 476 0
Mail
Subject to technical changes
®
V 1.1 / 19.03.2014
10 / 10
CHROMOFLEX
Pro
Bluetooth