ChromTech Porvair Miniseal II 매뉴얼 - 페이지 14

{카테고리_이름} ChromTech Porvair Miniseal II에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ChromTech Porvair Miniseal II 20 페이지.

Fault Finding

Problem

MiniSeal 2 will not power up after switching

on.

Foil will not seal properly on a microplate.

Poor plate seal in middle of plate.

"Error up switch" is displayed on the screen

after a seal is run.

The unit fails to respond to commands

If the problem with the MiniSeal 2 unit persists after the above actions have been carried out ,

contact Porvair Ltd for further investigation (contact details listed below)

Service and Repairs

For all requirements for service and repairs please contact:

Porvair Limited

Tel: ++44 (0)1268 522431

Fax: ++44 (0)1268 270231

Email:

Note: For any spare components please refer to the inventory list and contact Porvair for pricing

information.

Action

Check fuse

1) Check seal time and temperature

and reset if necessary.

2) Ensure the correct height of plate

spacers are being used.

Check if plate supports are required. If

required contact Porvair

Ensure the correct plate spacer/

combination is being used and restart

the machine.

Restart the machine.

MiniSeal 2 Issue 1