Burley d'lite 소유자 지침 및 안전 매뉴얼 - 페이지 5

{카테고리_이름} Burley d'lite에 대한 소유자 지침 및 안전 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Burley d'lite 8 페이지. Child trailers
Burley d'lite에 대해서도 마찬가지입니다: 소유자 지침 및 안전 매뉴얼 (15 페이지), 브로셔 및 사양 (5 페이지), 소유자 지침 및 안전 매뉴얼 (12 페이지), 사용자 설명서 (12 페이지), 소유자 지침 및 안전 매뉴얼 (20 페이지), 소유자 및 안전 매뉴얼 (8 페이지), 소유자 지침 및 안전 매뉴얼 (12 페이지), 소유자 지침 및 안전 매뉴얼 (16 페이지)

Re-Assembly with the Wheel Pivot Assembly in Place

Slide the tongue into the wheel pivot assembly and line up the hole in the

tongue with the hole in the top of the assembly. Run the provided 2 inch bolt

through the grommet in the end of the safety strap, the holes in the wheel

pivot assembly and the tongue, and finally the D-ring. Secure the bolt with

the locking nut (tighten to 6 ft-lbs). The end of the bolt should be flush or

completely pass through the end of the nut. Place the 1" bolts through the

holes on the side of the pivot assembly. Secure the bolts with the lock nuts

(tighten to 6 ft-lbs.).

Hole in pivot

and tongue

Re-install the Hitch

To re-install your hitch, place the Stroller wheel in the "Bike" (up) position,

so that it is out of the way, and tighten the knob. (See the following section

"Converting From Strollering to Trailering" for more details.) Then mount the

hitch to the left rear dropout of your bike. Slide the hitch connector end on

the tongue between the hitch side arms, insert the retaining pin through the

holes and close the pin. Wrap the safety strap around the inside of the chain

stay twice and then over the hitch body. Fasten the hook to the D-ring on the

top of the tongue. (See your trailer manual for more instruction.)

Bolt

assembly

D-ring

B U R L E Y S T R O L L E R K I T O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L

Safety strap

with grommet

Hitch

Nut