AquaPur H3HNC 운영 매뉴얼 - 페이지 8

{카테고리_이름} AquaPur H3HNC에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaPur H3HNC 10 페이지. Water dispencer

Filter types

The dispenser is provided with 3 types of cartridges (the order being from left to

right, on the left side being the input and on the right side the water output

distribution for the user) the filter order is as follows:

1. 11 "PP expanded micron cartridge; Retains particles in water larger than 5

μm. Size: 11 '', to be replaced after 6 months.

2. 11 " Activated carbon block filter - the cartridge is made out of coconut

shell, disposable, useful for reducing the concentration of free residual chlorine

and secondary compounds, which occur as a result of the water chlorination,

also used to reduce the concentration of organic compounds from water and

improving taste and smell Size: 11 '', to be replaced after 6 months.

3. 11 "Ultrafiltration membrane cartridge - It has the ability to retain particles

larger than 0.1µm. Thus, in addition to the finest suspension particles, it can also

filter bacteria such as Escherichia Coli, Salmonella, Pseudomonas Aeruginosa.

Size: 11 '', to be replaced after 6 months.

The cartridges have a "push-ﬁt" connection system, the mounting position and

the direction of water ﬂow being illustrated on the label on each cartridge. The

model label can be found below. When replacing the ﬁlters the water input of the

dispenser must be turned oﬀ. When replacing the cartridges the remaining water

found on the insides of the tubes will spill.