BURLI MAMMOTH 설치 매뉴얼 - 페이지 5

{카테고리_이름} BURLI MAMMOTH에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BURLI MAMMOTH 8 페이지.

MAMMOTH SQUAT STAND

Step 1 – Assemble Base

Tools Required: Level, Stepladder, Adjustable Wrench, 15/16

Materials Included: Base (2), Crossmember Support (1), Hex Bolt (4), Nyloc Nut (4), Washer (8)

Materials Needed: None

1. Arrange Base components approximately 4' apart and parallel to each other

2. Place Crossmember Support between Base components as illustrated

2.1. Note: Both ends of the Base components are identical

3. Fasten Crossmember Support to Base components

3.1. Slide Washer onto Hex Bolt

3.2. Thread Hex Bolt and Washer through Base component and Crossmember

support toward the middle of the Squat Stand

3.3. Slide second Washer onto Hex Bolt

3.4. Fasten Nyloc Nut onto Hex Bolt

3.5. Repeat 4x

4. Tighten all 4 Hex Bolts using Adjustable Wrench and 15/16

Socket Wrench