Diamond PIZZA/D38 사용 지침 및 유지 관리 매뉴얼 - 페이지 11

{카테고리_이름} Diamond PIZZA/D38에 대한 사용 지침 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond PIZZA/D38 13 페이지.

5.2 - FIRST USE OF MACHINE

The machine is delivered with a scratch-resistant plastic film covering the

outer surfaces, that should be carefully removed before using the

machine, along with any residues of adhesive.

To do this, do not use any sharp instruments, abrasive or inflammable

substances.

After removing the film, the machine should be made to operate in an

open environment at maximum power for 15-20 minutes.

This should be done to heat the insulating materials used in the

construction of the machine and any traces of grease left after mechanical

processing of the separate parts that could produce some smoke the first

time the machine is used.

CHAP.6 - CLEANING THE MACHINE

CAUTION! Before cleaning the machine unplug it from the power

supply.

6.1 - GENERAL INFORMATION



The machine should be washed using normal detergents at room

temperature, and a wet cloth.

The machine should be cleaned scrupulously on all parts in contact with

food products. The shelves can be removed as shown below.

Fig. n°7 - Removal of shelves



Do not use spray cleaners or jets of water at high pressure.



Do not use scrapers, brushes or anything else that could damage the

surface of the machine.



The quartz pipes should be cleaned using a wad of cotton soaked in

alcohol.