Diamond PPL-800 매뉴얼 - 페이지 15

{카테고리_이름} Diamond PPL-800에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond PPL-800 20 페이지.

PUSHING "ON" THE MACHINE IS READY FOR THE WORK.

PUSHING CONTINUOUSLY THE BUTTON "MODE" IT IS POSSIBLE TO SELECT ONE OF THE THREE

POSSIBILITIES FOR THE PORTIONER CUT.

• MODE' 1 - TIMER,

• MODE' 2 – MECHANICAL,

• MODE' 3 – MECHANICAL TIMER.

LED LIGHT INDICATE THE SELECTED FUNCTION

MODE' 1 "TIMER"

IT IS NECESSARY TO USE THIS SELECTION TO MAKE SMALL PORTIONS FROM 20 A 60 GR.

•

PUSH "MODE" UP TO THE SELECTION "1".

•

SELECT AND INSERT A SMALL CONE WITH 20 OR 30 HOLE DIAMETER.

•

TAKE OFF (POINT 4.2) THE PIN AND THE FEELER (5)

•

PUSH "+" OR "-" TO REGULATE THE CUTTING TIME OG THE BLADE UP TO THE REQUIRED

WEIGHT

WITH THE MODE SELECTION 1 THE MACHINE WORKS ONLY WITH TIMER

MODE' 2 "MECHANICAL"

IT IS POSSIBLE TO USE THIS REGULATION TO MAKE PORTIONS FROM 60 UP TO 300 GR

•

PUSH "MODE" WITH THE SELECTION 2.

•

SELECT AND INSERT A CONE WITH DIAMETER HOLE BETWEEN 40 UP TO 55 AND

ADJUST THE HANDLE ON THE LEFT SIDE IN ORDER TO CHANGE THE DISTANCE FROM

THE FEELER ANF THE END OF THE CONE UP TO THE REQUIRED WEIGHT

WITH THE MODE SELECTION 2 THE MACHINE WORKS ONLY WITH THE HANDLE AND

MECHANICALLY.

MODE' 3 "MECHANICAL+TIMER"

IT IS POSSIBLE TO USE THIS SELECTION FOR PORTIONS FROM 300 UP TO 800 GR

•

PUSH MODE UP TO THE SELECTION 3

•

SELECT AND INSERT A CONE WITH DIAMETER HOLE BETWEEN 60 UP TO 70 AND

ADJUST THE HANDLE ON THE LEFT SIDE IN ORDER TO OBTAIN THE MAX DISTANCE

FROM THE FEELER AND THE END OF THE CONE.

•

PUSH + OR – TO ADJUST THE TIMER IN ORDER TO OBTAIN THE REQUIRED WEIGHT

WITH THE MODE SELECTION 3 THE MACHINE WORKS

TOGETHER.

FOR BIG PORTIONS OF 600-800 GR IT IS POSSIBLE TO USE THE SPOON FEELER IN ORDER TO

OBTAIN A WEIGHT MORE PRECISE

WITH THE HANDLE AND THE TIMER

SPOON FEELER XL