AquaRest Spas AR-400 X4H 소유자 매뉴얼 - 페이지 10
{카테고리_이름} AquaRest Spas AR-400 X4H에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaRest Spas AR-400 X4H 20 페이지. Uhs spa
페이지 인쇄
Air Injection Venturi Adjustment
Air injection into the massage jet water flow may be controlled by turning the venturi dials located on either side of
the spa.
Surface Skim Filter
The spa's automatic surface skim filter is designed to remove floating debris and contaminants such as body lotions by
drawing water through a specially formulated filter cartridge. It is critical that this element
be routinely cleaned.
Cleaning the Filter Cartridge
To clean the filter cartridge follow these steps:
1. Turn off power to the spa. Never operate the spa without the filter cartridge in place. It is difficult to remove
the filter cartridge while the water is flowing. Also, there is a risk that debris may be draw into the plumbing
system, damage the pump and void the warranty.
2. Remove the end nut by turning it counter clockwise (Fig 5).
3. Pull up filter cartridge (Fig 5).
4. Remove the cartridge and thoroughly rinse with a garden hose until the cartridge is free of dirt and debris.
5.
Return the clean cartridge to the filter well and turn the end nut clockwise until snug.
E
q
u
i
E
q
u
i
Fig 5
p
m
e
n
t
O
p
e
r
a
t
i
o
n
p
m
e
n
t
O
p
e
r
a
t
i
o
n
10