Diamond 19056801 설치, 사용 및 유지 관리 매뉴얼 - 페이지 10

{카테고리_이름} Diamond 19056801에 대한 설치, 사용 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond 19056801 10 페이지.

3.3 SPECIAL MAINTENANCE

(Authorised technical personnel)



Check that the premise's temperature does not exceed that indicated for your cabinet.



The guarantee will be made void if there is insufficient ventilation.



Check that the doors close properly.



Do not disassemble the mobile components guards without first having turned the appliance

off.



Take all the necessary precautions before accessing the area of the condenser unit, given the

existence of high temperatures of some components, with the resulting risk of burns.

If the flexible power cable or cord is damaged, it must be replaced by the manufacturer,



after-sales service or authorised technical personnel in order to prevent risks.



It if is replaced, the earth pin must be positioned again.

If you need to change a cable, you must never use a smaller section.



The electrical connections are carried out with 6.35 mm Faston terminals, protected with

covers.



If it is necessary to disassemble the inner lid of the control panel's electrical installation, it is

extremely important to leave it exactly as it was when reassembling it.

Ensure that these are disposed of in an environmentally friendly manner. Make disused old

appliances unusable prior to disposal. Pull the mains plug out of the socket and disconnect the

plug from the mains cable.

Ensure that the product is disposed of appropriately by means of environmentally friendly

disposal. Ensure that any damage to health caused by inappropriate disposal is avoided. The

accompanying papers indicate that this appliance is not to be treated like household waste.

Instead, it should be taken to the collection point for the recycling of electrical and electronic

equipment.

Disposal must be undertaken according to the respective locally applicable regulations.

For further information please contact your local authority or Disposal Company