Burmester 035 소유자 매뉴얼 - 페이지 12
{카테고리_이름} Burmester 035에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Burmester 035 16 페이지.
페이지 인쇄Menu items
The following table lists all items that can be adjusted using the SETUP menu. (Values set
in brackets show the factory settings) Following to the table you'll find a detailed description
of all menu items.
MENU ITEM
Volume
Input level PHONO
Input level CD
Input level TUNER
Input level AUX
Input level TAPE
Output amplification
Headphones
Volume control
Serial number
Default
Volume
This menu item allows you to preset the volume level when the 035 is switched on.
Input level
The input level adjustment feature serves to avoid big jumps in volume when switching
between signal sources with different output levels.
Output level
To achieve the best match with your power amps or active loudspeakers the output level of
the amplification stages may be adjusted.
OUT HIGH stands for high amplification, OUT LOW accordingly for low amplification.
We recommend to choose the setting LOW when using BURMESTER power amps.
Headphones
This menu item offers you to choose whether the signal at the PREAMP outputs will break
(HP OFF) while inserting a headphones plug into headphones jack or not (HP ON).
Volume control
The responsivity of the VOLUME knob can be selected in this menu item
DYN stands for dynamic control. That means, turning the volume knob slowly effects a
step-by-step changing of volume level. If you turn the volume knob faster, the changing of
volume level will be done in larger steps.
SLOW means low responsivity.
MID means medium responsivity.
FAST means high responsivity.
Serial number
If you would like to see the serial number of the unit after switching on the pre amp, choose
(ON).
Defaults
If you want to load the factory settings of the unit, incl. display brightness and tone control,
turn the volume knob to the right when this menu item is activated. The display will show
CHANGED! , if reset is done.
DESCRIPTION
Selecting initial volume
Input level adjustment for PHONO input
Input level adjustment for CD input
Input level adjustment for TUNER input
Input level adjustment for AUX input
Input level adjustment for TAPE input
Output amplification low (LOW) or high (HIGH)
PREAMP output if headphones are plugged in
Responsivity of VOLUME knob
Show the serial number after switching on the unit
Loading of factory settings
DISPLAY
L-AUX
DEFAULT ok!
8
VALUE
VOL
00 to 20 (01)
L-PH
-6 to +6 (0)
L- CD
-6 to +6 (0)
L- TU
-6 to +6 (0)
-6 to +6 (0)
L-TP
-6 to +6 (0)
OUT
LOW / HIGH (LOW)
HP
OFF / ON (OFF)
DYN / SLOW / MID /
VC
FAST (FAST)
SNR
OFF / ON (OFF)