Chrysalis STARFIRE-10 사용자 설명서 - 페이지 8
{카테고리_이름} Chrysalis STARFIRE-10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Chrysalis STARFIRE-10 17 페이지. Starfire series
Chrysalis STARFIRE-10에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)
페이지 인쇄R
P
E A R
A N E L
Figure 1. Starfire-10 and -12 Rear Panel Connections
Figure 1 shows the connections on the rear panel of the Starfire. Following are brief descriptions of the connections described in Figure 1.
(1)
SPEAKER LEVEL INPUT terminals - Connect these input terminals to the speaker output terminals of your amplifier
or receiver.
(2)
SPEAKER LEVEL OUTPUT terminals - The speaker-level signal to the front speakers is output from these terminals.
(3)
LINE INPUT jacks - Connect these jacks to the LINE OUT jacks of the amplifier.
(4)
LOW-PASS CROSSOVER - Use this knob to select the high-frequency range at which you wish to cut-off the signal to
the subwoofer.
(5)
Power indicator - Red: Unit is in standby mode. Green: Unit is in operation mode. (automatically turns to STANDBY
mode if no signal for eight minutes)
(6)
PHASE switch - Select the switch position at which you hear a louder mid-bass sound.
(7)
VOLUME LEVEL knob - Use this knob to adjust the output level of the subwoofer.
Starfire Series Manual
w w w . c h r y s a l i s a c o u s t i c s . c o m
C
O N N E C T I O N S
5