Chrysalis STARFIRE-12 사용자 설명서 - 페이지 7

{카테고리_이름} Chrysalis STARFIRE-12에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Chrysalis STARFIRE-12 17 페이지. Starfire series
Chrysalis STARFIRE-12에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)

페이지 인쇄

w w w . c h r y s a l i s a c o u s t i c s . c o m

P h a s e A d j u s t m e n t - 0 ° / 1 8 0 °

This control allows you to "reverse" the phase of the subwoofer' s output signal 180° to correct for any possible mismatch and resulting

cancellation between the subwoofer and your main speakers/amplifier. To adjust, simply listen to the system with music playing, then depress

the phase switch from one position to the other and listen for a change in mid-bass frequency output. The correct position will have a greater

amount of apparent mid-bass frequency output.

For all installations, experiment with the phase switch to determine the setting (0 or 180 degrees) that produces the most mid-bass. If the

settings sound similar, we recommend the "0" position.

A u t o Tu r n o n F u n c t i o n

The subwoofer will turn itself on automatically when an audio signal is present. If no signal is present for approximately eight minutes, the

unit will switch to standby mode (Red LED). While in standby mode, your subwoofer will draw very minimal power.

Warning:

If the Sub-Out channel signal level from your receiver is too weak, this feature will not operate properly and shut the subwoofer off while you

are listening to it. To correct this, see the VOLUME CONTROL section on previous page.

Starfire Series Manual