Diamond P07EN10080 사용 설명서 - 페이지 9

{카테고리_이름} Diamond P07EN10080에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond P07EN10080 12 페이지.

FIRST LIGHTING OF THE OVEN

At the first use of the appliance it is advisable to heat the empty oven to

eliminate bad smells caused by the refractory stones evaporation and the

inner metallic parts.

Procedure:

- fully open the exhauster valve;

- turn the main switch in position "1";

- leave the oven working (empty) for at least 8 hours at the temperature

of 300° before proceeding to the first baking.

START UP PHASE

The analogical thermometer display shows the actual average

temperature of the baking chamber. Rotate the thermostat knobs and

until the expected temperature. In this way top and bottom heating

elements are under working and the relevant light signals switch on.

USE OF EXAUSTER VALVE

While baking regulate the valve according to the exingencies.

oven is under heating; so, the set temperature is reached in shortest

possible time.

By the exhauster valve the operator can regulate the baking steams and

fumes flow out from the baking chamber, while in the same the heat is

kept.

It is advisable to keep the valve fully closed when the

EXAUSTER

VALVE

SHUT DOWN PHASE

To shut down the oven turn the thermostas to the position "0".

- 29 -