3B SCIENTIFIC PHYSICS 1017895 지침서 - 페이지 8
{카테고리_이름} 3B SCIENTIFIC PHYSICS 1017895에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3B SCIENTIFIC PHYSICS 1017895 8 페이지. Demo multimeter
페이지 인쇄12. Battery and fuses
The demo-multimeter has a compartment which
houses both the battery and fuses and which is
accessible at the rear once its cover is opened.
One fuse each is provided for the 3 A and 10 A
sockets:
FF10 A/600 V, breaking capacity: at least 10 kA
(3B order number: 5008564)
The polarity is indicated by plus and minus signs
inside the fuse holder compartment. A mechani-
cal system ensures the battery makes no contact
if it is inserted the wrong way round.
Battery and fuse compartment
12.1 Battery testing:
Batteries which are discharged and have not
been used for a while may leak.
Check the amount of charge left in
the battery from time to time.
Flat or leaking batteries should be
removed from the meter.
If the demo multimeter goes unused
for a long period:
Remove the meter's battery be-
fore reusing.
12.2 Changing the battery:
Before opening the casing:
Turn off the demo multimeter.
Disconnect all measuring leads.
Remove the cover at the rear.
Replace flat batteries with 1.5-V alkaline bat-
teries of size AA IEC LR6.
Place the negative pole of the battery on the
spring.
Close the cover again afterwards.
3B Scientific GmbH ▪ Rudorffweg 8 ▪ 21031 Hamburg ▪ Germany ▪ www.3bscientific.com
12.3 Changing fuses:
Electrostatic charging of the display window can
affect the measurements under certain circum-
stances:
Dirt or moisture in the measurement sockets can
affect readings.
Should you need to dis-
pose of the equipment it-
self, never throw it away in
normal domestic waste. If
being
households it can be dis-
posed of at the local public
waste disposal authority.
Subject to technical amendments
© Copyright 2016 3B Scientific GmbH
Before opening the casing:
Turn off the demo multimeter.
Disconnect all measuring leads.
Remove the cover at the rear.
Check the fuses.
Blown fuses should be replaced with ones of
the same rating.
Close the cover again afterwards.
13. Cleaning
For cleaning, use a soft cloth, slightly mois-
tened with alcohol, or a brush.
To remove such charge, use a soft cloth
slightly soaked in alcohol or a paint brush.
Shake out any dirt that may be in the meas-
urement sockets.
Soak a new swab with isopropyl alcohol and
work around the inside of each measurement
socket.
14. Disposal
The packaging should be disposed of at local
recycling points.
used
in
private
Comply with the applicable regulations for the
disposal of electrical equipment.
Do not dispose of the batteries in the regular
household garbage. Follow the applicable le-
gal regulations (UK: Waste Batteries and Ac-
cumulators Regulations, EU: 2006/66/EC).