Aquasana AQ-4035 지침

{카테고리_이름} Aquasana AQ-4035에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquasana AQ-4035 2 페이지. Cartridge

페이지 인쇄

3. Install the new filter cartridges.

• Insert the "A" cartridge with the

nipple-end first. Then, press and

rotate to seat properly.

• Install the "B" cartridge by inserting the

nipple into the "B" cap

4. Tighten the threaded filter caps

firmly in the opposite direction of the

arrows shown on the caps

• The "A" cap will tighten by turning it

to the left

• The "B" cap will tighten by turning it

to the right

• Ensure O-ring is in place

5. Turn on the cold water and check for

leaks with the filter still lying flat

• If leaks are noticed, repeat step 3 and 4

• If no leaks are noticed, return the filter to the upright position

and allow the water to run for 10 minutes until all cloudiness and

discoloration have disappeared

6. Enjoy the benefits of drinking clean, healthy water!

Do not use with water that is microbiologically unsafe or of unknown

quality without adequate disinfection before or after the system.

• Conforms to NSF/ANSI Standard 53 for VOC reduction. See

performance data sheet for individual contaminants and reduction

performance: aquasana.com/performance.

• Systems certified of cyst reduction may be used on disinfected waters

that may contain filterable cysts.

• Rated capacity: 450 Gallons

• Flow Rate: 0.5 GPM

Important: cartridges are

inserted opposite of each other.

aq4035_install_20151028

Replacement Cartridge Instructions

for use with AQ-4000, AQ-4000W, AQ-4000B, AQ-4000P,

AQ-4500*, AQ-4501*, AQ-4600, and AQ-4601

*Not covered by NSF certification

Tested and certified by NSF International against NSF/

ANSI Standards 42, 53 and 401 in Models AQ-4000,

AQ-4600 and AQ-4601 for the reduction of the claims

specified on the Performance Data Sheet and at www.

REPLACEMENT

ELEMENT

Model AQ-4035

Aquasana, Inc.

6310 Midway Road

Haltom City, TX 76117

866.662.6885 USA

877.332.7873 Canada

aquasana.com