Aquasana AQ-UV-10C 작동 및 설치 지침 - 페이지 4
{카테고리_이름} Aquasana AQ-UV-10C에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquasana AQ-UV-10C 16 페이지. Whole house uv filter
Aquasana AQ-UV-10C에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)
페이지 인쇄
Safety Considerations
Although your UV system has been manufactured to the highest safety standards,
care must be followed when operating and/or maintaining your system.
1. Before servicing the system, disconnect the power cord from the electrical
outlet.
2. Energy given off by the UV lamp is harmful to your eyes and skin. NEVER
look directly at an illuminated UV lamp without adequate eye protection and
always protect your skin from direct exposure to the UV light.
3. For complete disinfection, use ONLY genuine replacement parts.
4. Do not operate the unit if it has any damaged or missing components.
5. To avoid possible electrical shock, use the unit only with a properly grounded
electrical outlet.
6. Never perform any maintenance to the system unless you are comfortable in
doing so. Contact the manufacturer for service instructions if required.
7. Do not use this system for any purpose other than what it was intended for.
Misuse of this system could potentially cause harm to the user or others.
8. Your system is intended to be installed indoors and away from leaking
plumbing. DO NOT plug the unit in if the system or any of the components are
wet.
9. The disinfection system should be directly installed into a ground fault circuit
interrupter (GFCI). If the use of an extension cord is required, the cord must
be manufactured with a minimum of 16 gauge wire and care should be taken to
avoid potential tripping hazards.
10. We recommend that a licensed plumber or certified technician install the
system. The warranty does not cover systems that were not installed in
compliance with the instructions by a licensed plumber or that have been
abused or operated incorrectly (see page 15).
4