Aquasana EQ-300 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Aquasana EQ-300에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquasana EQ-300 16 페이지. Whole house water filter
Aquasana EQ-300에 대해서도 마찬가지입니다: 설치 매뉴얼 (5 페이지), 소유자 매뉴얼 (16 페이지)

페이지 인쇄

Prepare Rhino Tank

Wrap your pipe nipples with NSF certified

plumber's tape. Connect the nipples to the

system's inlet and outlet.

NOTE: DO NOT use pipe

solvent (dope), as solvents

in some types of pipe dope

may cause damage to plastic

fittings. Do not over-tighten to

prevent damage to filter head.

COPPER PIPES ONLY (proceed to Step 5 for PVC Pipes)

When installing on metallic plumbing,

ensure you take the following

precautions. Securely install two (2)

grounding clamps and a #4 copper

wire (not included) across the

location where the system will be

installed. Tightly clamp at both

ends, as shown in the illustration.

ELECTRICAL SHOCK HAZARD

Prior to installation on metallic plumbing, securely install two grounding clamps and a #4 copper wire

per installation instructions. Failure to follow these instructions can result in death or electric shock.

Install Shut-off Valve and Ensure Spacing

1. Using a pipe cutter, cut into the main water supply line to install the

shut-off valve.

2. Loosely fit shut-off valve to calculate proper spacing of components.

3. Measure distance for Pre-Filter, Rhino tank, and optional add-ons

(Salt-Free Conditioner, Post-Filter, and UV) and mark pipe

accordingly.

If you're installing additional add-ons make sure to read through

those separate installation manuals prior to fully installing your

complete system.

Ground

Clamp

WARNING

(Cont. on next page)

INSTALLATION STEPS

Ground

Wire

Ground

Clamp