Aquasana EQ-AST-WH-C 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Aquasana EQ-AST-WH-C에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aquasana EQ-AST-WH-C 12 페이지. Whole house salt-free water conditioner
Aquasana EQ-AST-WH-C에 대해서도 마찬가지입니다: 설치 지침 (5 페이지), 소유자 매뉴얼 (12 페이지)

페이지 인쇄

1. Use & Care

Prepare Salt-Free Water Conditioner

Wrap your pipe nipples with NSF

certified plumber's tape. Connect the

nipples to the system's inlet and outlet.

NOTE: DO NOT use pipe solvent

(dope), as solvents in some types

of pipe dope may cause damage to

plastic fittings. Do not over-tighten

to prevent damage to filter head.

COPPER PIPES ONLY (proceed to Step 5 for PVC Pipes)

When installing on metallic plumbing,

ensure you take the following precautions.

Securely install two (2) grounding clamps

and a #4 copper wire (not included) across

the location where the system will be

installed. Tightly clamp at both ends,

as shown in the illustration.

WARNING

ELECTRICAL SHOCK HAZARD

Prior to installation on metallic

plumbing, securely install two

grounding clamps and a #4 copper

wire per installation instructions.

Failure to follow these instructions

can result in death or electric shock.

INSTALLATION STEPS

Ground Wire

Ground

Clamp

Ground

Clamp