Panasonic AG AG-HPX170 정보 메뉴 - 페이지 6
{카테고리_이름} Panasonic AG AG-HPX170에 대한 정보 메뉴을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG AG-HPX170 21 페이지. P2 hd memory card camera-recorder
Panasonic AG AG-HPX170에 대해서도 마찬가지입니다: 사양 (16 페이지)
페이지 인쇄
Setup menu list
SCENE FILE screen
Item
LOAD/SAVE/INIT
OPERATION TYPE
FRAME RATE
SYNCRO SCAN
DETAIL LEVEL
V DETAIL LEVEL
DETAIL CORING
CHROMA LEVEL
CHROMA PHASE
COLOR TEMP Ach
COLOR TEMP Bch
MASTER PED
A.IRIS LEVEL
98
Display
mode
(Camera)
LOAD:
Loads the scene file settings saved using SAVE.
SAVE:
Saves the changed scene file settings.
INITIAL:
The settings of the scene file selected with the scene file dial are
returned to the factory settings.
(Camera)
Switches the shutter and frame rate operation to the video type or film
type.
VIDEO CAM: SYNCRO SCAN is displayed using 1/n units.
FILM CAM: SYNCRO SCAN is displayed as an angle.
(Camera)
Selects the shooting interval and exposure time when 720P and FILM
CAM is selected. The DEFAULT value is dependent on the frame rate
of the recording format.
DEFAULT, 1, 1, 18, 0, 1, , , , , 7, 8, 0, , , , 0,
, 8, , 0 FRAME
(Camera)
Adjusts the synchro scan shutter speed used for shooting images on a
TV screen, etc.
Pushing the Operation lever the e or r direction and holding it down
will cause the values to change at a faster rate.
When VIDEO CAM is selected as the OPERATION TYPE option
setting:
•
60P/60i:
1/60.0...1/249.8
•
30P/30PN:
1/30.0...1/48.0...1/249.8
•
24P/24PA/24PN:
1/24.0...1/48.0...1/249.8
When FILM CAM is selected as the OPERATION TYPE option setting:
The shutter speed is displayed as an angle such as "180.0 d."
10.0 deg...180.0 deg...360.0 deg (the angle can be changed in
increments of 0.5 degrees)
(Camera)
Adjusts the level of the image outline correction (in the horizontal and
vertical directions).
-7...0...+7
(Camera)
Adjusts the level of outline correction in the vertical direction.
-7...0...+7
(Camera)
Adjusts the level of noise reduction of the detail signal.
-7...0...+7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
(Camera)
Adjusts the chroma level.
-7...0...+7
(Camera)
Makes fine adjustments to the chroma phase.
-7...0...+7
(Camera)
Makes fine adjustments to the color temperature (after white balance
Ach adjustment).
-7...0...+7
(Camera)
Makes fine adjustments to the color temperature (after white balance
Bch adjustment).
-7...0...+7
(Camera)
Adjusts the master pedestal (black level of the image) as the basis for
images.
-100...0...+100
(Camera)
Sets the desired AUTO IRIS level.
-10...0...+10
Description of settings