Panasonic AG-HMC150 정보 메뉴 - 페이지 18
{카테고리_이름} Panasonic AG-HMC150에 대한 정보 메뉴을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-HMC150 20 페이지. Avchd camcorder
Panasonic AG-HMC150에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 브로셔 및 사양 (12 페이지), 브로셔 (16 페이지), 제품 설명서 (22 페이지), 기본 지침 (20 페이지), 사용자 설명서 (35 페이지)
페이지 인쇄
Setup menu list (continued)
OPERATION screen
Item
DELETE
(PB)
INDEX
(PB)
CLIP PROTECT (PB)
OTHER FUNCTIONS screen
Item
IR REMOTE
(Camera)
(PB)
REC LAMP
(Camera)
BEEP SOUND
(Camera)
CLOCK SET
(Camera)
(PB)
98
Display
mode
Deletes clips.
ALL CLIPS: Deletes all clips.
SELECT:
NO:
•
Clips for which CLIP PROTECT is specified are not deleted.
Adds indexes to clips or deletes them.
YES:
Adds or deletes indexes.
NO:
Returns to the last screen.
Protects clips to prevent accidental deletion.
YES:
Enables clip protection or cancels protection.
NO:
Returns to the last screen.
•
Executing a format of the memory card (page 32) will delete all clips even if
they are protected.
Display
mode
Sets the operations of the supplied remote control unit.
ON:
Accepts commands from the remote control.
OFF:
Operations are not accepted from remote control.
Sets lighting of the tally lamp.
FRONT: Front tally lamp (microphone side) lights.
REAR: Rear tally lamp (viewfinder side) lights.
BOTH: Both tally lamps light.
OFF:
The tally lamp does not light.
Turns the beep sound ON or OFF.
ON OFF
When ON is selected the beep is sounded, if the memory of the SD Memory
Card has been used up during recording.
When the beep is sounded, the audio signals from the output connector are
muted before the beep sound is output.
Sets the camera-recorder's calendar.
Description of settings
Deletes only the selected clips. Press the EXEC button to delete
clips.
Returns to the last screen.
Description of settings
indicates the factory setting.