Panasonic AG-HMC150 정보 메뉴 - 페이지 6

{카테고리_이름} Panasonic AG-HMC150에 대한 정보 메뉴을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-HMC150 20 페이지. Avchd camcorder
Panasonic AG-HMC150에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 브로셔 및 사양 (12 페이지), 브로셔 (16 페이지), 제품 설명서 (22 페이지), 기본 지침 (20 페이지), 사용자 설명서 (35 페이지)

페이지 인쇄
Panasonic AG-HMC150 정보 메뉴
Setup menu list

SCENE FILE screen

Item
CARD READ/
(Camera)
WRITE
LOAD/SAVE/
(Camera)
INIT
SYNCRO
(Camera)
SCAN
DETAIL LEVEL
(Camera)
V DETAIL
(Camera)
LEVEL
DETAIL
(Camera)
CORING
CHROMA
(Camera)
LEVEL
CHROMA
(Camera)
PHASE
COLOR TEMP
(Camera)
Ach
COLOR TEMP
(Camera)
Bch
MASTER PED
(Camera)
A.IRIS LEVEL
(Camera)
86
Display
mode
Reads and writes scene files on the SD Memory Card.
READ: Reads scene files (all scenes, F1 to F6) saved on the SD Memory Card
after setting values are selected.
WRITE: Saves current scene file setting values (for all scenes, F1 to F6) on the
SD Memory Card.
NO:
Returns to the last screen.
LOAD: Loads the scene file settings which is saved by this camera.
SAVE:
Saves the changed scene file settings.
INITIALIZE: The settings of the scene file selected with the SCENE FILE dial
NO:
Returns to the last screen.
Adjusts the synchro scan shutter speed used for shooting images on a TV
screen, etc.
Holding the Operation lever toward the
a faster rate.
•
60P/60i:
1/60.0...1/249.8 (Factory default setting is 1/48.0)
•
30P:
1/30.0...1/48.0...1/249.8
•
24P:
1/24.0...1/48.0...1/249.8
Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
- 7...0...+ 7
Adjusts the level of outline correction in the vertical direction.
- 7...0...+ 7
Adjusts the level of noise reduction of the detail signal.
- 7...0...+ 7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
Adjusts the chroma level.
- 7...0...+ 7
Makes fine adjustments to the chroma phase.
- 7...0...+ 7
Makes fine adjustments to the color temperature (after white balance Ach
adjustment).
- 7...0...+ 7
Makes fine adjustments to the color temperature (after white balance Bch
adjustment).
- 7...0...+ 7
Adjusts the master pedestal (black level of the image) as the basis for images.
- 100...0...+ 100
Sets the desired AUTO IRIS level.
- 10...0...+ 10
Description of settings
are returned to the factory settings.
or
will cause the values to change at
indicates the factory setting.