Panasonic AG-HPX250EJ 전기 조정 - 페이지 2

{카테고리_이름} Panasonic AG-HPX250EJ에 대한 전기 조정을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-HPX250EJ 20 페이지. Memory card camera recorder
Panasonic AG-HPX250EJ에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지)

페이지 인쇄

1. Video Output Level Adjustment

1. Preparation of adjustment

When an electrical adjustment is executed, the PC EVR software is used.

1-1. PC EVR software

1-1-1. Required tools and equipment for PC EVR software

When the PC EVR software is used, the following tools are required.

NAME

PC EVR

software

USB Driver for AG-HPX250/260 EVR Adjustment

USBC cable A type ↔ mini B

Personal Computer

*OS: WINDOWS XP SP2 / SP3

1-1-2. Installation method of USB driver

This USB driver is only for Windows XP.

1. Download the file "USB Driver for AG-HPX250/260 EVR Adjustment (VSI5386A)" from Global Service WEB

Site and extract it.

2. This camera recorder is set to COM mode.

< Setting method of COM mode >

2-1. Turn the power on and confirm that the camera recorder is set to CAMERA mode.

2-2. The COM mode is set by hold down the "PLAY (Tilt the operation lever in the ▲ direction)" button,

"EXIT" button and "RESET" button at the same time for three seconds or more. (The character of "COM"

blinks to the LCD screen when the COM mode is set.).

NOTE: To cancel the COM mode, execute the operation of the same button as the setting. (Com mode cannot be

cancelled if the power has been switched off and back on again.).

3. Connect the USB cable between USB connector and PC.

Part Number

VVS0095

VSI5386A

---

USB cable

A type

Pcs.

Download from the Global Service WEB site.

*NOTE:

USB connector

Mini-B

ELE-1

Remark