Panasonic AG-HPX250EN 전기 조정 - 페이지 5

{카테고리_이름} Panasonic AG-HPX250EN에 대한 전기 조정을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-HPX250EN 20 페이지.
Panasonic AG-HPX250EN에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지)

Panasonic AG-HPX250EN 전기 조정

1-1-3. Setup for PC EVR Software

1. Copy all files of the PC EVR software (VVS0095) to the PC.
2. Supply power to the Camera-Recorder and turn power ON.
3. Start up the PC EVR software by double-clicking "HPX250.exe".
4. The Selection screen will appear. Select the model name.
5. Select the "CAM(C)" and click "OK" button. The following screen will appear and when communication
between the PC and the Camera-Recorder has been succeeded, blue is displayed to the status lamp.
STATUS LAMP
6. The communication status between the PC and the camera recorder can be confirmed with the status lamp as
following color.
Not Connected
:
Connected
:
Reading
:
Writing
:
NOTE: When the "OK" button is clicked on the Selection screen, "Detection of not initialized P.C.Board" might
be executed in this EVR software. Please refer to the item "7-3. Setup of PC EVR software" (SECTION
1).
black
blue
green
red
ELE-4