Panasonic AG-HPX250P 전기 조정 - 페이지 10

{카테고리_이름} Panasonic AG-HPX250P에 대한 전기 조정을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-HPX250P 20 페이지.
Panasonic AG-HPX250P에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지)

2-1-1. Zoom center Adjustment

1. Select "CAM(C)" section after start up the PC EVR software, and click "OK" button.

2. Select "Adjustment Tool" in "Tools(W)" menu, Adjustment Tool screen will appear on screen.

3. Make the zoom position Tele terminal by pressing Zoom lever.

4. Click "T READ" button on the Adjustment Tool screen.

5. Make the zoom position Wide terminal by pressing Zoom lever.

6. Click "W READ" button on the Adjustment Tool screen.

7. Repeat the operation from step 3 to 6 three times.

8. Clicking "Set" button as follows on the Adjustment Tool screen, the adjusted value is saved in EEPROM.

9. When the adjustment is completed, the following message screen is displayed. Turn the power of camera

recorder to OFF and clicking "OK" button, PC EVR software closes compulsorily.

1. Select "CAM(C)" section after start up the PC EVR software, and click "OK" button.

2. Select "Adjustment Tool" in "Tools(W)" menu, Adjustment Tool screen will appear on screen.

3. Clicking the "Execute" button, the adjustment is executed automatically.

4. When the adjustment is completed, the message "Adjustment OK!" is displayed in the STATUS column on

the Adjustment Tool screen and the following message screen is displayed. Clicking "OK" button, power is

turned OFF and ON automatically and PC EVR software closes compulsorily.

ELE-9