Panasonic AG-HPX250P 전기 조정 - 페이지 18

{카테고리_이름} Panasonic AG-HPX250P에 대한 전기 조정을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AG-HPX250P 20 페이지.
Panasonic AG-HPX250P에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지)

페이지 인쇄
Panasonic AG-HPX250P 전기 조정
Start button
Execute button
25. Clicking the "Start" button for ND Filter3, the camera recorder is set to ND Filter3 adjustment mode.
26. Confirm that the white level of Y signal is around 70%.
27. Clicking the "Execute" button for ND Filter3, the ND Filter3(ND 1/64) adjustment is executed automatically.
28. When the adjustment is completed, the message "ND Adjustment END!" is displayed in the STATUS column
on the Adjustment Tool screen.
29. Confirm that the vector dot is located at the zero point in the WFM (vector scope).
30. Confirm that there is no colored on Monitor TV.
31. Click the "Set" button for ND Filter3 to end of ND Filter3 adjustment mode. The adjusted value is saved in
EEPROM.
Start button
Execute button
Adjustment value
R-ch Upper/Lower, B-ch Upper/Lower
Adjustment value
R-ch Upper/Lower, B-ch Upper/Lower
ELE-17
Clicking the "Set" button, the adjusted
value is saved in EEPROM.
Clicking the "Set" button, the adjusted
value is saved in EEPROM.