Panasonic AGDVC20P - 3 CCD DV CAMCORDER 사용 설명서 - 페이지 10

{카테고리_이름} Panasonic AGDVC20P - 3 CCD DV CAMCORDER에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AGDVC20P - 3 CCD DV CAMCORDER 42 페이지. Agmini-dv camera/recorder
Panasonic AGDVC20P - 3 CCD DV CAMCORDER에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지), 사용 설명서 (42 페이지)

페이지 인쇄

Panasonic AGDVC20P - 3 CCD DV CAMCORDER 사용 설명서

Using the viewfinder

Pull out the viewfinder and turn it upward/downward by

pinching the viewfinder extension knob.

Adjusting the field of view

Adjust the focus by sliding the eyepiece corrector knob.

≥You can adjust the brightness of the viewfinder from the

menu.

Before using

Power supply

Charging the battery

When this product is purchased, the battery is not charged.

Charge the battery before using this product.

≥Battery charging time (

≥We recommend using Panasonic batteries.

≥If you use other batteries, we cannot guarantee the quality of

this product.

≥If the DC input lead is connected to the AC adapter, then the

battery will not get charged. Remove the DC input lead from

the AC adapter.

Connect the AC mains lead to the AC adapter and the AC

mains socket.

Put the battery on the battery mount by aligning the

mark, and then securely plug it in.

Charging lamp

Lights up: Charging

Goes off:

Charging completed

Flashing:

The battery is over discharged (discharged

excessively). In a while, the lamp will light up and

normal charging will start.

When the battery temperature is excessively high

or low, the [CHARGE] lamp flashes and the

charging time will be longer than normal.

Connecting to the AC outlet

Connect the AC mains lead to the AC adapter and the AC

mains socket.

Connect the DC Input Lead to the [DC IN] Socket on the

camera-recorder.

Connect the DC input lead to the AC adapter.

≥Do not use the power cord for other equipment since the

power cord is exclusively designed for the camera-

recorder. Or do not use the power cord of other equipment

for the camera-recorder.

)

-11-