Panasonic AGDVX100 - DV CAMCORDER 설정 - 페이지 30
{카테고리_이름} Panasonic AGDVX100 - DV CAMCORDER에 대한 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AGDVX100 - DV CAMCORDER 42 페이지. Panasonic ag-dvx100b: quick start
Panasonic AGDVX100 - DV CAMCORDER에 대해서도 마찬가지입니다: 소프트웨어 설명서 (11 페이지), 브로셔 및 사양 (12 페이지)
페이지 인쇄
5. VCR
5.1 PLAYBACK FUNCTIONS Screen
Item
END SEARCH
12 bit AUDIO
AUDIO OUT
End Search
This item sets up the operation of the END SEARCH button when pressed.
BLANK: In this mode the END SEARCH will look for any blank spaces on the videotape.
Rec End: In this mode the END SEACH will look for the video that was shot last.
Note: When placed in the Rec End function and a new videotape is used, this function will
not operate correctly. If the tape is blank the operation will stop at the end of the tape.
12 bit Audio
When making a recording in the 12 bit audio mode, this item will choose the
audio Channels being used..
There are three selections:
ST1:
CH1 signals are recorded on Channel 1 track
CH2 signals are recorded on Channel 2 track
ST2:
CH1 signals are recorded on Channel 3 track
CH2 signals are recorded on Channel 4 track
MIX:
CH1 signals are recorded on Channel 1 and Channel 3 tracks
CH2 signals are recorded on Channel 2 and Channel 4 tracks
NOTE: If the audio has been recorded in the 16 bit mode, there will be no Channel 3 or
Channel 4. In this mode there will only be:
CH1 signals are recorded on Channel 1 track
CH2 signals are recorded on Channel 2 track
Audio Out
used to set the audio signals that are sent to the RCA connectors when the
videotape is played back.
CH1 CH2 Channel 1 Connector has Channel 1 audio signals
Channel 2 Connector has Channel 2 audio signals
CH1
Channel 1 Connector has Channel 1 audio signals
Channel 2 Connector has Channel 1 audio signals
CH2
Channel 1 Connector has Channel 2 audio signals
Channel 2 Connector has Channel 2 audio signals
Settings
BLANK / REC END
ST1, ST2, MIX
CH1-CH2, CH1, CH2
Default
BLANK
ST1
CH1-CH2
30