AquaScape BUBBLING FOUNTAIN STONE 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} AquaScape BUBBLING FOUNTAIN STONE에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape BUBBLING FOUNTAIN STONE 20 페이지.

I N S T A L L A T I O N

1. Place basin in desired location and outline area to be excavated.

3. Place basin in hole and level front to back and side to side. Leveling

sand may be required.

5. Place paver sand up to top of basin and compact.

Note: If installing bubbling fountains into a permeable paver patio

and filling the voids between paver blocks, use the micro-grid

geotextile layer (included) beneath the pavers sitting directly on top of

the basin. A small slit will need to be cut in the center of the geotextile

layer to allow pump plumbing to pass through and provide access to

the pump.

☎

US 1-866-877-6637 |

I N S T R U C T I O N S

2. Excavate an additional 4-6" below excavation for paver base

depending on soil conditions. Compact bottom of hole to prevent

any unnecessary settling. Note: If installing directly into the ground,

excavate hole 16" deep, compact base, level unit, and back fill around

all sides

4. Place paver base around basin leaving approximately 1" from top of

basin and compact.

6. Place pump in bottom of the basin.

☎

CAN 1-866-766-3426 | www.aquascapeinc.com