Panasonic AGHVX200P - MEMORY CARD CAMCORDER 정보 메뉴 - 페이지 10
{카테고리_이름} Panasonic AGHVX200P - MEMORY CARD CAMCORDER에 대한 정보 메뉴을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AGHVX200P - MEMORY CARD CAMCORDER 25 페이지. Panasonic broadcast camcorder mechanical parts list
Panasonic AGHVX200P - MEMORY CARD CAMCORDER에 대해서도 마찬가지입니다: 부품 목록 (11 페이지)
Setup menu list (continued)
SW MODE screen (continued)
Item
USER1
P2
TAPE
USER2
P2
TAPE
USER3
P2
TAPE
104
Display
mode
(Camera) Selects the function assigned to the USER1 button.
REC CHECK:
Performs Rec Check.
SPOTLIGHT:
Auto iris control for the spotlight ON/OFF
BACKLIGHT:
Auto iris control for the backlight compensation (Page 39)
BLACKFADE:
Blackfade (Page 45)
WHITEFADE:
Whitefade (Page 45)
ATW:
ATW function ON/OFF
ATWLOCK:
Fixes the white balance value when the button is pressed during ATW. Press
again to perform ATW.
GAIN: 18 dB:
Press the button to set the gain value to 18 dB. This setting takes effect with
the 60i and 60P recording formats only. It is not valid when the recording
frame rate is less than 22 fps or when the slow shutter mode (1/15) is
established.
• When the gain value is set to 18 dB or set from 18 dB to another value, the
image can be disordered for a moment.
• If ON is set for the setting menu AUTO SW and you have selected a setting
other than OFF under AGC, auto gain will be provided when auto mode has
been established even if GAIN 18dB has been set.
FOCUS RING:
Selects the focus ring function (FOCUS or IRIS). The FOCUS RING is
functional when the FOCUS switch is in AUTO mode.
INDEX/MEMO:
Text memo recording (P2 card)(Page 48)/Index recording (cassette tape)
(Page 49)
SLOT SEL (P2 card only):
Selects one of the P2 card slots. (Page 48)
SHOT MARK (P2 card only):
Shot mark recording (Page 48)
(Camera) Selects the function assigned to the USER2 button.
The settings are the same as USER1 above.
BACKLIGHT
(Camera) Selects the function assigned to the USER3 button.
The settings are the same as USER1 above.
INDEX/MEMO
Description of settings
indicates the factory setting.