Panasonic AJ-HPX3000 절차 - 페이지 2

{카테고리_이름} Panasonic AJ-HPX3000에 대한 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AJ-HPX3000 5 페이지. Driver software (firmware) update
Panasonic AJ-HPX3000에 대해서도 마찬가지입니다: 브로셔 및 사양 (16 페이지), 정보 메뉴 (40 페이지)

페이지 인쇄

Update with the SD Card

2-1. Summary

1.Copy the update file of the Driver Software (Firmware) to an SD card.

2.Software can be updated using this SD card. (It is not suppurted MMC Card)

CAUTION: Before Update Software

●

Do not power down or pull card while upgrading.

part writing condition and the restart is not made.

2-2. Preparation

< Preparation for SD Card >

1. SD Card (more than 64MB memory card) is required.

2. Insert an SD card into the P2 equipment and format SD card.

NOTE: SD Card needs to be formatted by P2 equipment. SD card formatted by PC standard formatter will not

work.

< Copy of Image data for upgrade >

Copy the update file of Driver Software to the SD card as follows.

1. Download the Driver Software file "VSI*****.zip" from the support desk.

https://eww.pavc.panasonic.co.jp/pro-av/

2. Copy the file "VSI*****.zip" to the hard disk of your PC and extract the file.

3. Insert a formatted SD card into the card slot of PC.

4. Copy the whole folder "PRIVATE" in the extracted folder to the SD card.

NOTE: Do not change the construction of folder and the file name.

NOTE: External Power

It is best to power the unit from the external power supply. This will prevent the unit from shutting off during updating.

AJ-HPX3000 update procedure Oct.2008

If the program quits during loading, the data will be erased or

Page2/5

Panasonic Corporation