Panasonic AJ-PCD30PJ 사용 설명서 - 페이지 11
{카테고리_이름} Panasonic AJ-PCD30PJ에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic AJ-PCD30PJ 24 페이지. Operating instructions
Panasonic AJ-PCD30PJ에 대해서도 마찬가지입니다: 브로셔 (24 페이지)
페이지 인쇄
Installation
To Connect the device to a Personal Computer for External Use
1
Attach the rubber feet to the dimples on the
base of the device.
Dimples
2
Start the personal computer.
3
Plug the AC adaptor supplied with the device
into the DC IN 16 V socket on the device.
4
Pressing the power button switches on the
power and starts up the device.
After startup, the power indicator will light up
green.
5
To be connected by USB 3.0
Plug a USB 3.0 cable B connector into the
USB connector on the device, then plug the
other end (A connector) of the USB 3.0 cable
into the USB 3.0 port on the personal
computer.
(continue)
USB 3.0 connector
Caution: Even with a USB 3.0 cable, if the
device is connected to a USB 2.0 port it will
operate as a USB 2.0 device.
<Note>
No USB 3.0 cable is supplied with the device
in the package. Use a commercially available
USB 3.0 cable (shielded).
Take care to use a USB cable that is no
longer than 3 metres. The device may not
operate properly with a cable longer than
3 metres.
To be connected by USB 2.0
Plug a USB 2.0 cable B connector into the
USB connector on the device, then plug the
other end (A connector) of the USB 2.0 cable
into the USB 2.0 port on the personal
computer.
<Note>
No USB 2.0 cable is supplied with the device
in the package. Use a commercially available
USB 2.0 cable (shielded).
Take care to use a USB cable that is no
longer than 3 metres. The device may not
operate properly with a cable longer than
3 metres.
USB 3.0 connector
11