AquaScape 30214 설치 지침 - 페이지 3

{카테고리_이름} AquaScape 30214에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape 30214 5 페이지. Booster fitting kit

페이지 인쇄

a q u a s c a p e r a i n x c h a n g e ™

Installation for Decorative Fountain RainXchange

House

Booster

Pump

Union

Ball Valve

Downspout

Filter

Systems

™

Top View

Snorkel and Centipede

Decorative Urn

Installation

•

Use the plumbing diagram below to see the complete assembly order of the components.

•

Cut into the ¾" kink-free decorative fountain plumbing line and install the barbed tee fitting

included with your Decorative Booster Pump kit (item# 30170). Secure the fittings with the

supplied hose clamps. Follow the plumbing installation diagram for proper configuration.

•

A ball valve is included with the plumbing kit to allow the water supply to be shut-off to the

Booster Pump when removing for service. Note: It is recommended to install the ball valve

as close as possible to the plumbing tee off the main water feature line if the project is

located in regions that experience freeze/thaw.

•

A union is included to allow easy removal of Booster Pump for service or winter storage

and should be positioned as close as possible to the Booster Pump.

Operation

•

Before using your RainXchange

™

Booster Pump, you must prime the pump first. To do

this, simply make sure that your Aquascape water feature pump is running. Next, rotate

the red knob on top of the Booster Pump counterclockwise until water begins to trickle

out. Then simply tighten the knob back down by turning it clockwise and you are ready

to use the Booster Pump.

Bill of Materials for Item #30170, RainXchange™ Booster Deco Fitting Kit

(A) #99118 - 3/4" Barbed Tee - qty.1 (Included with Kit #30173)

(B) 3/4" Kink-Free Tubing (not included)

(D) #98180 - 1" mpt x 3/4" barbed - qty.3

(E) #98636 - 1" Threaded Union - qty.1

(F) #30084/30085 - Booster Pump (not included)

(G) #30091 - 1" mpt x mpt nipple galvanized 1" long - qty.1

(H) #30090 - 1" FPT x 3/4" FPT elbow galvanized - qty.1

(I) #30092 - 3/4" mpt x mpt nipple galvanized 4" long - qty.1

(J) #30093 - 3/4" FPT Spigot - qty.1 (Included with Kit #30173)

(K) #99106 - Fitting 7/16" to 1" SS Hose Clamp - qty. 4

*Included with Kit #30173

c a p t u r e > f i lt e r > r e u s e