AquaScape 45010 지침 및 유지 관리 - 페이지 8

{카테고리_이름} AquaScape 45010에 대한 지침 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape 45010 20 페이지. Adjustable flow pond pump
AquaScape 45010에 대해서도 마찬가지입니다: 지침 및 유지 관리 (20 페이지)

페이지 인쇄

Winter Application

• If running through winter conditions, check regularly to make sure it is functioning properly and ice is not preventing water

from reaching the pump. In the event of a power failure, the pump should be removed to prevent any freeze damage to the

pump or the piping.

• If concerned about possible freeze damage, disconnect and remove the pump. Be careful not to lose the flat rubber washer.

Clean with fresh water and store the pump in a frost-free location. If needed, use Aquascape Pump Cleaner Maintenance

Solution (#91143) to remove excessive buildup.

Troubleshooting

• Reduced water flow

– Check the outer and inner filter screens

• Pump hums but doesn't push water

– The pump or plumbing may be clogged

∙ Make sure nothing is blocking the intake

∙ Clean the inner and outer screens

∙ Clean the impeller rotor assembly and internal pump body

– Make sure the pump is receiving the correct voltage

– Make sure the impeller blades are not worn or damaged

• Pump not working

– Ground fault circuit interrupter (GFCI) may have tripped

– The pump is not receiving the correct voltage

• Device won't pair

– Make sure the outlet is receiving power

– Make sure you have adequate wireless coverage to connect the device

– Reset the device to factory defaults

– Make sure the ground fault circuit interrupter (GFCI) is not tripped

☎

US (866) 877-6637 |

CAN (866) 766-3426 | aquascapeinc.com