AquaScape 99444 설치 및 유지 관리 지침 매뉴얼 - 페이지 2

{카테고리_이름} AquaScape 99444에 대한 설치 및 유지 관리 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape 99444 16 페이지. Solids handling pump

AquaForce

Solids Handling Pump

Installation & Maintenance Instructions

Congratulations on your purchase of your new Aquascape™ Aqua-

Force™ Pump! You are the owner of one of the best magnetically

driven pumps on the market today. Because of its solids handling

capabilities, the Aquascape™ AquaForce™ Pump is designed spe-

cifically for your water garden. It is capable of transporting solids up

to 1/4" (7mm) from your pond to a waterfall, or preferably, a filtration

device such as the Aquascape™ UltraKlean™ Pressure Filter.

1) electrical Safety Aquascape™ AquaForce™ Pump

• Inspect your Aquascape™ AquaForce™ Pump upon arrival for any obvious signs of dam-

age. If damage is found, return the unit to where it was purchased for an exchange.

• Always unplug the Aquascape™ AquaForce™ Pump electrical supply before any routine

maintenance.

• Do not operate Aquascape™ AquaForce™ Pump with a damaged cord or plug

• Any pond related electrical equipment requires a GFI protected circuit. Always have a

qualified electrician install any electrical outlets. Test your GFI outlet on a regular basis.

• Do not use cord to pull plug from outlet. Grasp the plug and pull to disconnect.

• The Aquascape™ AquaForce™ Pump comes equipped with a 25' power cord. This should

be enough to reach an outlet close to your pond. Do not splice or remove the pump cord as

this will void any warranty.

• During winter, if you are not using the pump as a deicer, remove the pump from the pond

and place in a bucket of pond water in a frost-free location.

• The Aquascape™ AquaForce™ Pump has been designed to operate submersed in pond

water. DO NOT OPERATE DRY!

• KEEP THIS MANUAL—DO NOT THROW AWAY!

™