Chrysler 2004 Crossfire 매뉴얼 - 페이지 4
{카테고리_이름} Chrysler 2004 Crossfire에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Chrysler 2004 Crossfire 15 페이지.
페이지 인쇄
+IRIVEP STIVEXMSR
7[MXGLMRK SR SJJ
• Volume control – press on/off button.
• With the ignition key.
If the unit was switched off via the ignition, the
unit will switch on, when the ignition is switched
on again. After switching off the ignition, the unit
can be prevented from switching off by pressing
the volume control within 3 seconds.
Note
When the ignition is switched off, the unit can be
switched on by pressing the volume control button,
but it will switch off automatically after 1 hour.
%HNYWXMRK XLI ZSPYQI
Turn volume control to right / left. The current
volume level appears briefly on the display.
3. General operation
7SYRH WIXXMRKW
The following functions can be called up:
T R E B
B A L
(Treble) and
(Balance – volume
distribution left/right).
Bass and treble settings (values from -9 to +9) for
the AM/FM wavebands and CD mode are stored
separately. The setting for balance is stored
commonly for all modes (values from -9 to +9).
After 6 seconds without any action, or by pressing
3, 4, 5, 6 or 7, the current setting
can be quit. The new setting is stored.
Bass (BASS)
Press 2 repeatedly until
B A S S
Set the desired bass level by turning the right rotary
control/push button.
If the right rotary control/push button is pressed,
the treble level adjustment is accessed.
Treble (TREB)
Press 2 repeatedly until
B A S S
,
Set the desired treble level by turning the right
rotary control/push button.
If the right rotary control/push button is pressed,
the balance adjustment is accessed.
Balance – Volume distribution left/right (BAL)
Press 2 repeatedly until
appears.
Set the desired balance by turning the right rotary
control/push button.
If the right rotary control/push button is pressed,
the bass adjustment is accessed.
T R E B
appears.
B A L
appears.