Diamond P42/X-RM42A 사용 설명서 - 페이지 10

{카테고리_이름} Diamond P42/X-RM42A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond P42/X-RM42A 16 페이지.

After each adjustment tighten the screw again to lock the counterweight.

At this point, if necessary, regulate the equalizer's counterweight (C):

Changing the equalizer's counterweight position, and hence the equalizer's

sensitivity according to its position, requires loosening the locking screw.

Top sensitivity:

move the counterweight towards the inside;

recommended for low weights.

Intermediate sensitivity:

put the counterweight in the middle;

recommended for intermediate weights.

Lowest sensitivity:

move the counterweight towards the outside;

recommended for high weights.

After each adjustment tighten the screw again to lock the counterweight.

(C)

6.2.3

Work procedure

Models with oblique top rollers

Press the control treadle to set the machine rollers going (for models without treadle

push the START button on the circuit board to start the machine and the STOP button

to stop it.)

WARNING: while the machine is under working, it is

strictly forbidden to remove the security protections,

because of the presence of moving parts which can

cause hands crashing.

- 40 -

(D)