Diamond P42/XV-P42TA 사용 설명서 - 페이지 7

{카테고리_이름} Diamond P42/XV-P42TA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond P42/XV-P42TA 16 페이지.

INSTALLATION

Installation must be executed by qualified personnel in compliance with local, national and

European regulations.

Ensure that the machine is put on a flat stand with a suitable carrying capacity.

After unpacking the rolling machine, put it in the prepared location, keeping in mind the

minimum distances (see point 4.2) to be respected. Remove any polystyrene protections

and take off the protecting film (F). Avoid using tools which might damage the surfaces.

5.4.1

Electrical connection

Just connect the electricity-supply cable to the electricity network.

The electrical outlet must be easily accessible, no moving should be necessary.

The electrical connection (plug) must be easily accessible, also after oven

installation.

The distance between the oven and the socket must be suitable, as not to cause tension in

the power supply cable. The cable, moreover, must not be located beneath the machine

support base.

If the electrical power supply cable is damaged, it must be replaced by the

technical assistance service or by a qualified technician to prevent any risks.

5.4.1.1

Ground connection

It is mandatory that the electrical system is equipped with a ground connection.

- 37 -

(F)