AquaScape 75001 교육 및 유지 관리 - 페이지 5

{카테고리_이름} AquaScape 75001에 대한 교육 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape 75001 16 페이지. 2-outlet/4-outlet pond aeration kits

페이지 인쇄

Installation

STEP 1

UNPACK KIT COMPONENTS

• Carefully unpack the kit components.

STEP 2

SELECT LOCATION

• Select an indoor location

for the pond aerator pump

that is protected from the

weather. The location needs

to be dry and free from

airborne dust and debris.

If possible position or raise

the unit so it rests above

the pond water level to help

protect the air pump from water damage.

NOTE: DO NOT submerge the pond aerator pump in

water.

STEP 3

LAYOUT AERATION

TUBING

• Lay out the aeration tubing

with pre-installed check

valves.

STEP 4

ATTACH TUBING

• Attach the end of aeration tubing with the pre-installed

check valve to the front nozzle on the air pump.

NOTE: The check valve is designed to prevent water from

siphoning back through the tubing and entering into the

compressor. Failure to install the check valve may result in

the compressor being permanently damaged, voiding the

warranty.

☎

aquascapeinc.com |

CAN (866) 766-3426 |

Check Valve

☎

US (866) 877-6637

STEP 5

ATTACH AERATION DISCS

• Attach the aeration discs

to the opposite end of the

aeration tubing.

STEP 6

POSITION AERATION

DISCS IN POND

• Position the aeration discs

in the bottom of the pond.

We recommend separating

the aeration discs apart

from each other to maximize

the circulation throughout

the entire pond.

STEP 7

PLUG IN PUMP

• Plug the pump to a ground

fault circuit interrupter (GFCI)

rated receptacle and enjoy

the benefits.

TIP: Small rocks

or gravel can be

used to hide the

aeration tubing

and prevent it from floating, or

to secure the aeration disc in the proper position.

Suggested Pond Installation