AquaScape 91104 지침 및 유지 관리 - 페이지 4

{카테고리_이름} AquaScape 91104에 대한 지침 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape 91104 20 페이지. Adjustable flow solids-handling pond pump
AquaScape 91104에 대해서도 마찬가지입니다: 교육 및 유지 관리 (9 페이지), 교육 및 유지 관리 (16 페이지)

페이지 인쇄

• Always operate the pump fully submerged. Failure to do

so will overheat the pump and cause it to fail, thus voiding

the warranty. DO NOT OPERATE DRY.

• Use only in fully assembled state, and be sure that both

the upper and lower cage screens are completely snapped

together. Failure to operate the pump without the filter

cage closed will allow large debris to enter the pump,

causing the pump to fail and voiding the warranty.

• DO NOT wear loose clothing that may become

entangled in the impeller or other moving parts.

• Keep clear of suction and discharge openings. DO NOT

insert fingers into pump with power connected.

• DO NOT pump hazardous materials or liquids, such as oil,

saltwater or organic solvents.

• DO NOT block or restrict discharge.

• Products returned must be cleaned, sanitized, or

decontaminated as necessary prior to shipment. This will

ensure that employees will not be exposed to health

Model Number

Item Number

Average Pond Size Recommendation

Maximum Flow Rate

Maximum Head Height

Motor Type

Wattage

Amperage

Power Cord Length

Pump Discharge Diameter

Multi-Hose Fitting Diameters

Warranty

*Wattage range depending on remote control flow setting

Installation

• The AquaForce Pump is designed to be submerged

directly in the pond. To maximize pond circulation, locate

the AquaForce pump as far as possible from the water

entering back into the water feature (Ex. 1).

• It is recommended that the pump NOT be positioned in

the deepest area of the pond. This will protect the fish by

hazards in handling said material. All applicable laws and

regulations shall apply.

AquaForce Pond Pump Specifications

• Input Voltage: 120V AC

• Input Frequency: 60 Hz

• Submersible pump

• For outdoor or indoor use

• Thermally protected

• This pump has been evaluated for use with freshwater only

• Input Amps and Wattage

AquaForce Adjustable Flow Pond Pump Specs

For ponds up to 16,000 US gallons

preventing the pond from completely draining in the case

of a leak in the plumbing or filter. Bricks or stones can be

used, if needed, to raise the pump up off the bottom of the

pond.

• The AquaForce includes a wide assortment of fittings.

Select the appropriate fitting(s) needed for your application

(Ex 2).

Multi-Hose Adapter

Ex. 1

☎

US (866) 877-6637 |

IMPORTANT: Aquascape, Inc. is not

responsible for losses, injury, or death

resulting from a failure to observe these safety

precautions, misuse or abuse of pumps or

equipment.

4000-8000

91104

7,794

28'

Asynchronous

500 - 660*

5.5

20'

1.5" MPT

1", 1.25", 1.5", 2"

3-Year Limited

☎

CAN (866) 766-3426 | aquascapeinc.com

Ex. 2