AquaScape AQUAFORCE 91113 지침 및 유지 관리 - 페이지 5

{카테고리_이름} AquaScape AQUAFORCE 91113에 대한 지침 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape AQUAFORCE 91113 16 페이지. Solids-handling pond pump
AquaScape AQUAFORCE 91113에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

페이지 인쇄

Threaded Collar

• The extremely

versatile Rotational

Ball Outlet provides

you the ability to

adjust the pump discharge to the perfect position that your

water feature set-up requires. Loosening the threaded

collar allows you to rotate the upper half of the ball. A ﬂ at

rubber washer seal is included to ensure a hand-tight and

leak-free connection. Make sure the ﬂ at rubber washer is

in place before installing the ﬁ ttings.

• Install the right-

sized Multi-Hose

Adapter, based

on the diameter of

the tubing you are

using.

• The AquaForce

includes a

wide assortment of ﬁ ttings

to choose from. Select the

appropriate ﬁ tting(s) needed

for your application.

• The threaded collar, on

all of the ﬁ ttings, enables

the AquaForce

pump to

be installed and removed

without the need for any

tools. Do not use tools to

attach the ﬁ ttings onto the

pump discharge. Fittings

need to be hand-tightened

only.

• Attach tubing to the ﬁ tting. If tubing is loose on the ﬁ tting,

use a hose clamp (not included) to secure tubing onto the

ﬁ tting.

• Connect the other end

of the pump tubing to

the pond ﬁ lter, such

as a biological ﬁ lter,

waterfall spillway or

pressurized ﬁ lter.

• Connect the pump to an outlet that is protected by a

ground fault interrupter. Once the pump is running and

water is circulating, check for any leaks where the external

connections are made.

• If using pipe with a larger

diameter than the smaller

ﬁ ttings of the Multi-Hose

Adapters, cut off the

smaller section to avoid

any ﬂ ow restriction.