Diamond HE1412/P 설치, 사용 및 유지 관리 매뉴얼 - 페이지 8

{카테고리_이름} Diamond HE1412/P에 대한 설치, 사용 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond HE1412/P 9 페이지.

2.3 Limits

The climatic class 4 operating limits established for the cabinet are:

Setting

Room temperature

Condensation temperature

Relative humidity

With these guidelines, we would like to offer both you and the technical assistance service help

so that the cabinet always works perfectly throughout its useful life.

We will deal with the cleaning you can carry out as well as a quick machine check before

contacting the technical support service. We hope this will be useful.

Before carrying out any cleaning operations, the appliance must be disconnected from the

socket, and the power switch turned to OFF or 0.

The cabinets are equipped with a waste pipe for cleaning, as well as for collecting the possible

flow of liquids from the food. It is essential to remove and clean the waste pipe plug during the

cleaning operation, to prevent it from being blocked up with solid waste. This is so that any

liquids present do not become stagnant.

If you have to call for a repairperson, you can check the cabinet before ringing. In some cases,

the operating faults that can occur are caused by something simple that the users themselves

can solve.

The following are examples:

a) The refrigerator does not work

Check that electricity reaches the refrigerator by checking if the power switch is on.

b) Temperature too low

Check that there are no heat sources nearby.

Check that the thermostat cut off point is very near to 0 ºC/-18 ºC. To do so, press the "set"

key once and stop pressing it.

Check that the room temperature is not above +38 ºC, the appliance's maximum operating

temperature.

Check that the goods load is perfectly positioned and does not obstruct the outlets of the

inner fan, and that the time it has been inside is sufficient to cool the products.

Check that the doors close properly.

Limits

+ 38 ºC

+ 54 qC

60%