Diamond VK38-200 기술 매뉴얼 - 페이지 5

{카테고리_이름} Diamond VK38-200에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diamond VK38-200 14 페이지.
Diamond VK38-200에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지), 설치 매뉴얼 (13 페이지), 기술 매뉴얼 (14 페이지)

페이지 인쇄

The wires in this mains lead are coloured in accordance with the following code:

Green/Yellow: Earth, Blue: Neutral, Brown: Live.

The main electrical connections must be done by skilled electricians.

Start-up of the cabinet

Before use, we recommend that the cabinet is cleaned, see the section on maintenance and cleaning.

Important !

If the cabinet has been vertically placed during transport, please wait 2 hours before starting up the

cabinet.

Connect the cabinet to a socket and turn on the switch on the control panel, see fig. 1.9.

Thermostat

The thermostat is placed in the control panel, see fig. 2.0.

The thermostat has been pre-set and in most cases it is not necessary to adjust the settings.

When turning on the cabinet the display will show the current temperature in the cabinet.

Indications LED's:

DP1:

Flashing, indicates that a parameter is being changed

Switched on, indicates that the compressor is activated

DP2:

Switched on, indicates that defrosting is activated.

DP3:

Switched on, indicates that the evaporator fan is activated.

Fig. 1.9

Fig. 2.0

DP3 DP2 DP1